Decode Kernel Data Inpage Errors: A DIY Fix Guide to Stabilize Your System

Decode Kernel Data Inpage Errors: A DIY Fix Guide to Stabilize Your System

Robert Lv13

Decode Kernel Data Inpage Errors: A DIY Fix Guide to Stabilize Your System

The kernel data inpage error is a Windows error code displayed on theBlue Screen of Death (BSOD). Your computer will typically compile some diagnostic data and then restart when this error occurs. If the problem persists, your computer will eventually crash again with the same kernel data inpage error message.

Kernel data inpage errors are usually associated with hardware failures related tomemory modules andhard drives . In other cases, this same error will appear due to the effects of a virus.

How the Kernel Data Inpage Error Appears

When this error occurs, you’ll usually see a message like one of these:

Your PC ran into a problem and needs to restart. We’re just collecting some error info, and we’ll restart for you.

If you’d like to know more, you can search online later for this error: KERNEL_DATA_INPAGE_ERROR
KERNEL_DATA_INPAGE_ERROR

Causes of the Kernel Data Inpage Errors

The kernel data inpage error is a stop code displayed during blue screen crashes and is usually because of a problem with the random access memory (RAM) or hard drive.

Here are some additional codes associated with this error and the specific problems they refer to:

  • 0x0000007A : File access errors
  • 0xC000009C : Bad hard drive sectors
  • 0xC000009D : Loose cables or hard disk failure
  • 0xC000016A : Bad hard drive sectors
  • 0xC0000185 : Unseated or damaged cables

DLNow Video Downloader

How to Fix a Kernel Data Inpage Error

Since most kernel data inpage errors are because of bad memory modules or hard drives, the fix usually involves locating the malfunctioning component and replacing it.

Computers that experience this problem will typically restart after crashing. If your computer won’t turn on or boot up after experiencing a kernel data inpage error, check out ourguide to fixing a computer that won’t turn on .

In other cases, you’ll find that a memory module or hard drive isn’t correctly connected, or a virus caused the entire problem. Follow these troubleshooting steps to fix your kernel data inpage error:

Back up your data . If it’s a problem with your hard drive, you could end up losing important data. If you have anything stored you don’t want to lose, you should perform a backup before starting the diagnostic process. Make copies of any files you can’t afford to lose, and store them on aUSB flash drive , SD card, or cloud storage service.

  1. Inspect andreseat your memory modules .
    In some circumstances, the problem can be due to improperly seated memory modules. Open your computer and inspect your RAM to rule this out and prevent any unnecessary expenses. If any modules aren’t correctly installed or have come loose, reseat them and check to see if the kernel data inpage error still occurs.
    Exercise caution when opening a computer and adjusting components. Without a correctly set up anti-static bracelet, static electricity may permanently damage components like RAM.
  2. Inspect andreseat your hard drive cables .
    This error usually indicates that the drive has physical defects like badsectors . In some cases, you may experience this problem due to an improperly seated hard drive cable.
    Open your computer, locate your hard drive, and reseat the connector cable to rule this possibility out. You’ll also need to check and reseat the cable where it connects to yourmotherboard .
    When your hard drive is running, listen carefully for any loud clicking noises. If you hear them, your hard drive may be in the process of failing, which can cause this type of error. The fix is to back up all your data andreplace your hard drive .
  3. Test your memory.
    Windows 10 has a built-in memory diagnostic tool. Free options are available for Windows 7, Windows 8, and Windows 10. If you have Windows 10, type “memory “ into the taskbar search field, then selectWindows Memory Diagnostic >Restart now and check for problems .
    Thebest free memory diagnostic tool isMemTest 86 , which you can download and use to check your RAM.
    You may want to run more than one memory diagnostic tool. If any of these tools report a problem with your memory, considerreplacing your RAM . Doing so will probably fix your kernel data inpage error, but your RAM is likely to fail in the future either way if one of these tools finds a problem.
  4. Use a program to test your hard drive.
    You can check for problems with your hard drive using the built-inWindows error-checking tool or thechkdsk command .
    If your diagnostic tool of choice finds any problems, like bad sectors, allow it to attempt a fix. If successful, you should be able to use your computer without any further kernel data inpage error crashes.
    13 Best Free Hard Drive Testing Tools (July 2024)
  5. Unplug hardware peripherals .
    While less likely, this error can occur due to other peripherals. To rule this out, shut down your computer, unplug all of your hardware peripherals, and turn your computer back on.
    If your computer doesn’t crash with the kernel data inpage error, reconnect each device one at a time. When you find the device causing the problem, you can either leave it unplugged or replace it.
  6. Run a virus scan .
    In some cases, a virus may corrupt important files and cause a kernel data inpage error. It’s less likely than other possibilities, but it’s still important to check. If nothing else has worked, try running a virus scan. If any of these programs locate a virus, allow it to fix the problem, then check to see if you are still experiencing kernel data inpage errors.
    We maintain a largelist of free antivirus software you can use to check for this type of problem.

Other Blue Screen Problems Like the Kernel Data Inpage Error

The kernel data inpage error is just one of many errors that can show up when Windows crashes, revealing the infamous blue screen of death. If you’re experiencing blue screen issues, we have acomplete list of blue screen error codes that can help you get to the bottom of your problem.

We also have a generalguide to fixing the blue screen of death that may be useful.

FAQ

  • What is the function of the kernel of an operating system?
    The kernel is a low-level program that’s responsible for interfacing all applications with the physical hardware of the computer. Without the kernel, none of your applications would work. Every operating system has a kernel.
  • How do I fix a kernel security check failure error in Windows?
    Tofix a kernel security check failure error , remove any peripheral devices, disable Windows automatic restart, scan for corrupt files, and check the hard disk for errors. If you’re still having trouble, restore the system to a past working point, use the Startup Repair Tool, or reset the computer.
  • Which directory is the Linux kernel stored under?
    The Linux kernel is typically located in the**/boot** directory. In the terminal window, enterls /boot and look for a file calledvmlinuz orvmlinux .

Was this page helpful?

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

Tell us why!

Other Not enough details Hard to understand

Submit

  • Title: Decode Kernel Data Inpage Errors: A DIY Fix Guide to Stabilize Your System
  • Author: Robert
  • Created at : 2024-08-30 15:12:20
  • Updated at : 2024-08-31 15:12:20
  • Link: https://techtrends.techidaily.com/decode-kernel-data-inpage-errors-a-diy-fix-guide-to-stabilize-your-system/
  • License: This work is licensed under CC BY-NC-SA 4.0.